Product
Cleaning mode: can distinguish fully enclosed / semi-enclosed using gantry dobby robot transfer work, computer control touch screen operation of the whole process. Greatly reduce the labor intensity.
Washing process: Generally, it often adopts multi-tank type fully automatic and joint cleaning procedure. When cleaning, the parts are loaded into the net basket made of sound-permeable material for automatic, timed and circular cleaning. For parts with a large amount of dirt, pre-cleaning can be done by dipping, spraying, rinsing, etc., and then ultrasonic cleaning. Ultrasonic cleaning process mostly uses water-based detergent, because this type of detergent than ODS detergent on grease and lipophilic dirt solubility, permeability and dispersion ability is poor. Therefore, it is necessary to use multi-slot ultrasonic heating degreasing, ultrasonic heating cleaning, in order to accelerate the dissolution and dispersion of dirt, so that dirt from the parts (rough washing). Ultrasonic rinsing (fine washing) is to use pure water to wash away the cleaning medium left on the surface of the parts. High-pressure rinsing is the use of a full range of high-pressure pure water jets from top to bottom, in order to flush the small blind holes and crevices in the contaminated media. The clean parts after showering are quickly dried by hot air or steam to prevent oxidation and corrosion on the surface of the parts.
Related Product
Message
